Gas pipe installation in Belgium
Gas leaves no room for guesswork: every new run, extension or connection to a hob, boiler or other appliance must meet the rules, use the right materials and prove tight before you use the appliance. Van Dijk Home sets the take-off on your existing installation, sizes diameter and pressure for the load, lays the route with reachable shut-offs and finishes penetrations neatly. After every change comes a tightness or pressure test; only a stable result allows the line into service.
- Final price given before we start
- Up to 2 years warranty on labour
- Emergency line available 24/7
- Direct phone contact: +32 2 000 00 00
Our approach
Installing gas pipework in fixed steps
We always follow the same order: set capacity and route, lay in compliance, connect the appliance only after sizing checks, finish with a tightness test before service.
- 01
Start point, appliance and capacity
We look at where the existing gas pipe sits, which appliance must be connected and whether the installation can carry the extra load. Those facts set diameter, length and whether a new branch or a full run is needed.
- 02
Route and proposal
After survey you receive a proposed route and shut-off positions. Work starts only after agreement so walls or furniture are not opened without need.
- 03
Lay the pipe and finish
The pipe is laid with supports, gas-rated joints and tidy penetrations. Shut-offs stay reachable at the appliance and at the branch where useful.
- 04
Connect the appliance with checks
Before the final coupling we check diameter and pressure against the appliance specifications. Undersized pipe gives poor performance and extra risk; for a renovation or an extra appliance we assess existing capacity first.
- 05
Tightness test and handover
The new or altered pipe is put under test conditions. The appliance may enter service only with a stable result. You get guidance on shut-offs and the route for later maintenance.
Why care matters
Gas pipework leaves no margin for error
Wrong diameter, non-compliant joints or a line put into service without a test can leak, burn poorly or create unsafe pressure at home. We use materials and methods intended for gas, not leftover water pipe or temporary fixes.
For a renovation or an extra appliance the existing installation must carry the load. We assess that before connecting; after every change a new tightness test is required.
A hob or boiler looks like a simple hook-up, but undersized pipe gives weak flames, irregular behaviour or later leak risk. Professional work links appliance, pipe and test in one clear sequence.
Related services
From detection to upkeep of your gas installation
Smell gas or unsure about capacity? We tie the next step to what we see on site.
- Gas leak detection - find a suspected leak before repair or alteration
- Water heater - connection or pipe run to boiler or heater
- Plumbing maintenance - periodic check of shut-offs and visible pipework
- Emergency plumber - acute smell or unsafe situation after calling 112
- Pipe replacement - when water pipes also need renewal
Signals to watch
When gas pipe work is due
These situations suggest a new run, extension or review may be needed. If you smell gas, follow the safety steps under Before we arrive first.
- New hob, boiler or cooker without a suitable existing branch.
- Appliance that burns unevenly or with weak flames after a move.
- Renovation that requires rerouting or extending the gas path.
- Existing flexible hose or joint that looks worn or damaged.
- Extra gas appliance while you are unsure the pipe diameter is enough.
- You smell gas: open windows, no switches or flames, call 112 or the gas emergency line first.
Before we arrive
Safety first if you smell or suspect gas
Smell gas or suspect a leak? Safety comes before booking installation. Take these steps first; Van Dijk Home follows once the situation is safe.
- 01
Ventilate and avoid sparks
Open windows and doors. Do not flip switches, light flames or use devices that could spark.
- 02
Leave the space if needed
If the smell stays strong or you feel unwell, leave the building and wait outside for help.
- 03
Call 112 or the gas emergency service
Report a suspected gas leak to the emergency services or your network operator first. Follow their instructions before working on appliances.
- 04
Call Van Dijk Home afterwards
For a planned run, extension or connection without an acute smell, describe the appliance and desired route briefly. We then schedule the survey.
Clear pricing
What sets the price
Installation on quote: we set the price after a visit on site.
Price depends on length, bends, wall penetrations, appliance type and whether a new branch or a full run is needed. A short extension to a hob is not priced like a route across several floors.
You receive the final price after the survey, before we lay or connect. Call for an initial indication.
Benefits
- Diameter and pressure matched to the appliance and existing capacity
- Gas-rated pipe, fittings and reachable shut-offs
- Tightness test required before the line goes into service
Equipment & techniques
FAQ
Frequently asked questions
Question not on the list? We answer it by phone, no obligation.
+32 2 000 00 00How much does gas pipe installation cost?
Installation on quote: we set the price after a visit on site. Price depends on length, bends, wall penetrations, appliance type and whether a new branch or a full run is needed.
Why use a professional for gas pipe work?
Gas needs compliant material, correct diameter for the load and proven tightness before use. Wrong joints or a skipped test can leak or create unsafe combustion. We lay, test and complete the steps before the appliance goes live.
What is a gas tightness test?
The pipe is placed under controlled pressure and monitored over time. We then check joints for leaks. Only a stable result allows use. After every change to the pipe we run a new test.
Can you connect a hob?
Yes, if a suitable take-off exists and the diameter carries the load. We lay or extend the pipe, place a reachable shut-off and connect to the hob per the appliance instructions, followed by a tightness test.
Can an existing gas line be extended or rerouted?
Often yes, after checking capacity and the condition of the existing section. In a renovation we review the whole route; sometimes a new branch beats a long extension. The proposal follows the survey.
How long does gas pipe installation or connection take?
A simple connection or short extension can often be done in one visit, test included, once the route is agreed. Longer runs or several penetrations take more time. Scheduling depends on the area and availability.
Are there specific rules for gas pipes in Belgium?
Yes, gas installations face strict requirements on materials, installation and tests before service. We work within that framework and put the line into service only after a successful tightness test.
When should you call a heating engineer straight away?
If you smell gas, leave the building and call 112 before doing anything else. Other signs also call for action: a carbon monoxide alarm going off, soot marks or fumes around the boiler, a lockout that keeps returning, or a leak on the heating circuit. Avoid resetting the boiler over and over, as the lockout protects the installation and points to a fault that needs tracing.
Present in Brussels, in Wallonia and in Flanders
42
cities served · heating
Click a marker to open your city page.
Cities we serve
Why Van Dijk Home
Gas without proven tightness is not a handover. Van Dijk Home plans the route, uses compliant material, tests after every change and leaves reachable shut-offs. Up to 2 years warranty on labour; parts carry the manufacturer’s warranty.
Related services