Industrial unblocking in Belgium
On an industrial site a blocked pipe goes far beyond a sink: it threatens a whole production chain. A fouled collector, a buried network that backs up or a saturated process line can shut down an entire workshop. We work on large-diameter networks in plants, warehouses and production units: network analysis, jetting at matched flow, camera check of the result.
- Final price given before we start
- Up to 2 years warranty on labour
- Emergency line available 24/7
- Direct phone contact: +32 2 000 00 00
Our visit
A method sized for large-diameter networks
A big collector is not treated like a sink. Each step is sized to load, access and real network length, so we fix the cause without idling the site longer than needed.
- 01
Network analysis
We frame the visit with the technical lead: nature of the effluent, network plan, access points and work window so production is protected as far as possible.
- 02
Camera inspection
A camera runs the long stretches to locate the obstruction and identify the real cause (deposit, reverse fall, root or damaged pipe) before jetting begins.
- 03
High-capacity jetting
We jet at a flow matched to collector diameter, to lift sludge, sediment and process residue without damaging the pipe, then pump away what we detach.
- 04
Check and prevention
We verify the restored flow, note weak points along the run and, where useful, propose planned preventive jetting to limit returns and line stops.
Operating continuity
Jet without stopping production
For a site manager the real cost of a blockage is not the visit: it is the production stop it causes. Each idle hour on a line often costs far more than the jetting itself. That is why we organise every visit around continuity: isolate the section concerned, work in a low-activity window when possible, and leave the rest of the network running.
Our high-flow jetting kit is built for large diameters and long runs, so we can remove deposit volumes domestic kit could not move. Camera inspection confirms the collector is truly clear, not merely drilled through the middle.
The same approach covers transparency: we tell you plainly what we see in the network and what, over time, would justify regular maintenance. You then decide with full information: no method or jetting frequency imposed on you.
A network nothing like a domestic one
Heavy collectors under high load
Drainage networks in a plant, logistics platform or production unit have nothing in common with a home install. Collectors are large-diameter, often buried and branched over long distances, and they take continuous flows: wash water, process residue, sludge and sediment. That ongoing load builds compact deposits that one day cut the usable pipe section sharply.
The problem is rarely visible before it turns critical. A collector can run for months half fouled, then block suddenly at the worst moment: mid-production on a high-cadence day. Consequences go beyond inconvenience: line stop, backup into a workshop, hygiene risk and financial loss for every hour idle.
An industrial site therefore needs a different approach: high-flow jetting kit, camera inspection of long runs and, ideally, planned maintenance that anticipates the blockage instead of suffering it. Our job is to restore flow, and also to understand why the network fouled, to limit returns.
Around this problem
Industry, and what goes with it
Industrial unblocking often sits with other work, depending on deposit type and how urgent the site is. These are the most useful links.
Signals to watch
Signs an industrial network needs treatment
On a production site these symptoms mean a collector is closing up. Better to act before a line stop.
- A large-diameter collector or pipe drains more and more slowly.
- Sludge, sediment or process residue builds in the buried network.
- Backup appears in a workshop, wash area or channel.
- The network is branched and access to obstruction points is difficult.
- Pressure rises in the drainage system and low points overflow.
- Action is needed to avoid a costly production stop.
Before we arrive
What to do while you wait
On an industrial site a few steps limit impact and speed up our work. Essentials: do not worsen the blockage and prepare for our arrival.
- 01
Isolate the line concerned
Reduce or divert flows into the blocked section to stop backup and keep other stations from adding to the build-up.
- 02
Note recurring points
Tell us where blockages keep returning: those repeats steer diagnosis and jetting towards the real cause.
- 03
Keep plans and access ready
Have the network plan to hand and clear manholes and access points: that saves valuable time on a buried network.
- 04
Plan preventive jetting
Once the emergency is cleared, schedule regular maintenance: reliable protection against a future production stop.
Transparent pricing
What determines the price
Our call-outs start from €72.60 incl. 21% VAT (non-residential premises).
On an industrial site price depends on network scale, collector access and deposit volume to remove, not on how urgent your situation feels. We assess those points, then give you a clear estimate.
For recurring maintenance we offer a stable pricing frame that helps your maintenance budget. We only close once flow is truly restored and checked. Call us to frame the visit precisely on your network.
Benefits
- Kit sized for large sections
- Work can be scheduled outside production
- Jetting at a flow matched to the collector
- Camera inspection of collectors
- Preventive maintenance contract available
- Coordination with your technical team
Equipment & techniques
FAQ
Frequently asked questions
Question not on the list? We answer it by phone, no obligation.
+32 2 000 00 00How much does industrial unblocking cost?
Our call-outs start from €72.60 incl. 21% VAT (non-residential premises). On an industrial site price depends on network scale, collector access and deposit volume to remove, not on how urgent your situation feels.
How does industrial unblocking differ from a classic visit?
An industrial network is nothing like a domestic drain. Collectors are large-diameter, often buried and branched, and they take heavy continuous loads: process residue, sludge, sediment and technical greases. That needs high-flow jetting kit and a method that can lift compact deposits over long runs. We size each visit to the real network and effluent, not a standard package.
Can you work without stopping production?
Often yes, by isolating the section and working in a low-activity window. It depends on access, length to jet and how critical the line is. We frame that with your technical team before we start, to keep downtime to what is strictly needed.
What kinds of deposits do you treat in industrial networks?
Mineral sludge, sediment, process residue, fibres, technical greases and mixed deposits. Deposit type steers flow, nozzle and pumping. That is why diagnosis always comes before jetting: compact sludge is not treated like fluid grease.
Do you use a camera to inspect long pipes?
Yes. On long runs and branched collectors the camera locates the obstruction, identifies the cause and confirms after jetting that the section is truly clear, not merely drilled through the middle.
Do you offer preventive maintenance contracts for industrial sites?
Yes. Planned jetting at a rhythm matched to your effluent load limits unplanned line stops. We propose a clear frame (frequency, access, rate) that fits your maintenance budget, with no method imposed.
Is the price of an industrial visit stated in advance?
Yes. We assess network scale, access and deposit volume, then give a clear estimate. No surprise figure on the invoice. We close once flow is verified.
When should you call a drain technician straight away?
Some signs mean the blockage is no longer local: waste water backing up into a shower, sink or toilet, several fixtures draining slowly at the same time, water rising from a yard gully, or a sewer smell that lingers despite ventilation. In those cases, avoid reaching for chemical drain cleaners again and again: they attack seals and pipework without reaching a blockage further down the run.
Present in Brussels, in Wallonia and in Flanders
42
cities served · drainage
Click a marker to open your city page.
Cities we serve
Why Van Dijk Home
On a production site the urgency is not the clog itself but the stoppage it causes. We size kit to the real section, plan what can be planned, and verify the result on camera. Up to 2 years warranty on labour; parts carry the manufacturer’s warranty.
Related services